Precautions for the use of CNC woodworking lathes in the north and south

In the south and north of our country, the temperature difference will be large, and many machinery and equipment will be affected.Of course, the same is true of our CNC woodworking lathes. Then Hongxiang Electromechanical will introduce to you the precautions for the use of CNC woodworking lathes in the north and south.

1. The use of CNC woodworking lathes in southern cities is different. The temperature in the southern coast is high, the rain is heavy, and the climate is humid. The electrical components of CNC woodworking lathes are susceptible to moisture. The dust must be cleaned up in time and cleaned every day.

2. Woodworking lathes, when the temperature in the south is hot, the chassis zui should be turned on to cool down so as not to overheat the electrical components and affect the service life.

3. In northern woodworking lathes, when used in winter, due to the low temperature, zui allows the equipment to be air-operated before use, because the viscosity of the lubricating oil of mechanical parts increases as the temperature decreases, which will bring greater resistance to the equipment. It is better to process it after air operation.

The above are the precautions for the use of CNC woodworking lathes in the north and south. I hope it can be of help to everyone.