What are the advantages of CNC woodworking lathes?

CNC woodworking lathes play a very important role in modern production and are an indispensable and important part of modern production.，

Its production efficiency is also rising with the continuous improvement of technical level.Compared with ordinary woodworking lathes, CNC woodworking lathes are structurally and

Many improvements and improvements have been made in transmission.In summary, it is mainly manifested in the following aspects：

1. Stiffness.CNC woodworking lathes have to work under high-speed and heavy-load conditions, so the body, column, spindle, and workbench of the lathe、

The main components such as the tool holder need to have high stiffness to reduce deformation and vibration at work.

2. Sensitivity.The moving parts of CNC woodworking lathes have high sensitivity, and the moving parts such as workstations and tool holders are controlled by AC.

Or DC servo motor drive, using ball screw drive, to improve the positioning accuracy and smooth movement.Rail parts are usually

Use rolling rails, plastic rails, hydrostatic rails, etc. to reduce friction and make it crawl-free when moving at low speeds.

3. Vibration resistance.Some moving parts of CNC woodworking lathes, in addition to their stiffness and sensitivity, also have vibration resistance.，

That is, vibration is reduced under high-speed and heavy cutting conditions.

CNC woodworking lathe processing

4. Small thermal deformation.The automation of the process and the development of processing have a significant impact on the machining accuracy and accuracy stability of CNC lathes.

Higher and higher requirements have been put forward.The spindle, workbench, tool holder and other moving parts of the lathe will generate heat during movement，

Resulting in corresponding thermal deformation.In order to ensure the motion accuracy of the parts, the heat generation of each moving part is required to be less，

To prevent excessive thermal deformation.

5. Maintain high precision.CNC woodworking lathes should maintain a high equipment integrity rate and operating rate, which is mainly not required

CNC woodworking lathes have a high service life and accuracy retention, while ensuring that electrical and mechanical failures are minimized as much as possible.，

Try not to lose accuracy during long-term use.

6. High reliability.CNC woodworking lathes work under automatic or semi-automatic conditions, especially CNC lathes in flexible manufacturing systems.，

Unmanned management can be achieved in all-day operation, which requires high reliability of CNC lathes.For this，

The reliability of CNC devices and lathe structures is high, such as tool change mechanisms, pallets, and workpieces that move frequently during work.

Components such as exchange devices ensure that they are very reliable in long-term work.In addition, the lathe mechanism fault diagnosis system is introduced

And adaptive control systems, optimizing the amount of cutting, etc., also help CNC woodworking lathes work reliably.