Home >> News >>News >> How to improve the service life of CNC woodworking lathe?
Details

How to improve the service life of CNC woodworking lathe?

         CNC woodworking lathe is a very important processing equipment in the wood processing industry. Its characteristics of high processing efficiency, high precision and cost saving have brought good economic benefits to enterprises.


However, during the use of the CNC woodworking lathe, it is necessary to do a good job in maintenance to ensure that the equipment can successfully complete the processing operation and service life. The following Xiaobian will introduce the maintenance methods of CNC woodworking lathe.


1. The new lathe needs to be inspected once every 10 days to avoid loosening of screws during running in. In case of loosening, it should be tightened in time and checked regularly in the future.


2. The guide rail and screw rod shall be lubricated and maintained with an oil pump every day. If the oil path is blocked, it shall be handled in time


3. Wood flour shall be cleaned every 2 hours.


4. Oil shall be injected into the main shaft bearing once a year. In particular, the sliding guide rail shall be specially oiled on schedule.


5. The heel rest bearing shall be lubricated once every 1 month.


6. Check the lubrication of the bearing at the end of the ball screw every 3 months and replenish the oil in time.


7. Check the wear of the new V-belt after working for three months. If the V-belt is too loose, use the motor fixing plate to adjust the tightness of the V-belt.


8. The lathe has a dust cover, which can not only prevent dust but also ensure safety. It must not be removed at will.


9. Check whether the spindle motor is buried and covered by wood chips every day, and clean it in time to avoid fire.


  • Telephone

    • 13721953789
    • 15065646271
  • 微信扫一扫

seo seo